ACCESSORY PRODUCTS
Not only does CPR Tools create industry-leading products to aid in Data Recovery and Data Eradication, but we have created a line of Accessory Products. Each product in our accessory line is made to our demanding standards. Additionally, each product in our line is guaranteed to pair perfectly with our Data Recovery and Data Eradication hardware.
Please browse our Accessory Products Catalog, and call us at 844.674.DATA (3282) for more information or to place your order.

1.8″ Toshiba Drive Adapter
Easily converts any 1.8″ Toshiba drive to standard ATA for quick and safe imaging, cloning or testing.
Can be used to extend PSIClone and Hammer functionality!

1.8″ Hitachi Drive Adapter
Easily converts any 1.8″ Hitachi drive to standard ATA for quick and safe imaging, cloning or testing.
Can be used to extend PSIClone and Hammer functionality!

CPR Tools Compact Flash Adapter
Easily converts any Compact Flash drive to standard ATA for quick and safe imaging, cloning or testing.
Can be used to extend PSIClone™ and Hammer functionality!

CPR Tools Notebook Adapter
Easily converts any 2.5″ form factor drive to standard ATA for quick and safe imaging, cloning or testing.
Can be used to extend PSIClone™ and Hammer™ functionality!

CPR Tools PCMCIA Adapter
Easily converts any PCMCIA drive to standard ATA for quick and safe imaging, cloning or testing.
Can be used to extend PSIClone and Hammer functionality!
NOTE: This adapter functions with PCMCIA devices which support the ATA command set.

CPR Tools IDE to USB Adapter
Easily converts any USB Thumb Drive or other external storage to standard ATA for quick and safe imaging, cloning or testing.
Designed, tested and built specifically to extend PSIClone functionality to USB attached storage.
Works with USB attached hard drives (external storage) as well as USB thumb drives.

CPR Tools SCSI 80 Pin SCA Adapter
Easily converts any SCA 80 pin SCSI drive to work with 68 or 50 pin connectors.

CPR Tools Power Adapter with AC Cord
All cables and accessories are new and constructed to CPR Tools’ precise specifications.
While constructed for use with PSIClone™ and/or Hammer™, this power supply is ideal where 12V/4.2A DC output is needed. Compatible with many devices which use 2.5MM barrel connectors and require DC Output of 12V/4.2A.
Replacement Power Adapter (with A/C Cord) for use with PSIClone™ and/or Hammer™.
QuickSpecs
Power adapter with A/C Cord
DC Output – 12V/4.2A
2.5MM Barrel Connector
Compatible with many electronic devices
*Actual product may vary from picture shown

CPR Tools SCSI Cable 50 Pin
Replacement cable for SCSIHammer™
All cables and accessories are new and constructed to CPR Tools’ precise specifications.
This low cost, high-quality, 50 pin SCSI Cable is made for use with SCSI Hammer™ but suitable for use with any SCSI Device which requires legacy cabling.
18 inches long
2 connectors
*Actual product may vary from picture shown

CPR Tools SCSI Cable 68 Pin
Replacement cable for SCSIHammer™
All cables and accessories are new and constructed to CPR Tools’ precise specifications.
While intended for use with CPR Tools’ SCSIHammer™, this industry standard SCSI Cable is suitable for use wherever 68 pin SCSI drives are employed.
QuickSpecs:
30″ Internal Ultra320 cable
4 68 pin connectors (1 to controller, 3 for drives)
*Actual product may vary from picture shown

CPR Tools Combo SATA Cable
All cables and accessories are new and constructed to CPR Tools’ precise specifications.
Custom made for use with PSIClone™ and/or Hammer™, this replacement cable provides data and power connectivity for SATA drives.
While constructed for use with PSIClone™ and/or Hammer™, this industry standard cable is ideal wherever Serial ATA (SATA) drives are in use.
QuickSpecs
7″ combination SATA/power cable
HDD and Floppy Power Connectors
*Actual product may vary from picture shown

CPR Tools 7″ IDE (PATA) Cable
All cables and accessories are new and constructed to CPR Tools’ precise specifications.
Replacement IDE (PATA) cable for use with PSIClone™ and/or Hammer™.
While constructed for use with PSIClone™ and/or Hammer™, this industry standard cable is ideal wherever PATA drives are in use.
QuickSpecs
7″ rounded PATA (IDE) Cable
Rugged construction
Supports ATA 133
*Actual product may vary from picture shown

CPR Tools 6′ USB Cable
All cables and accessories are new and constructed to CPR Tools’ precise specifications.
Replacement 6 foot (1.8288m) USB Cable for use when connecting PSIClone™ and/orHammer™ to a host PC.
While intended for use with PSIClone™ and/or Hammer™, this product is compatible with most digital cameras and other USB portable devices.
QuickSpecs:
6′ USB 2.0 A-MINI B CABLE (5 PIN)
Type A Male – Type mini-B Male, Black
USB 2.0 and 1.1 compatible
*Actual product may vary from picture shown

50 Pin SCSI Terminator
Useful in any environment where termination is required. Owners of SCSI Hammer should make use of this accessories when working with 50 PIN drives.

68 Pin SCSI Terminator
Useful in any environment where termination is required.
Owners of SCSI Hammer should make use of this accessories when working with 68 PIN drives.